Compare 6292-GT Guillotine Blades The Guillotine™ Blades are a series of angled blades that allow the leading edge of the blade to slide into the work and stay there. This new design is so effective, you can come into the work head on or in the center of the carpet. ...
Compare 6290-GT Guillotine Blades The Guillotine™ Blades are a series of angled blades that allow the leading edge of the blade to slide into the work and stay there. This new design is so effective, you can come into the work head on or in the center of the carpet. ...
Compare 6284-GT Guillotine Blades The Guillotine™ Blades are a series of angled blades that allow the leading edge of the blade to slide into the work and stay there. This new design is so effective, you can come into the work head on or in the center of the carpet. ...
Compare 6285-GT Guillotineâ„¢ Blades The Guillotine Blades are a series of angled blades that allow the leading edge of the blade to slide into the work and stay there. This new design is so effective, you can come into the work head on or in the center of the carpet. These are...
Compare 7094 1" Blade Designed for VCT and adhesive re-scraper, these 2.5cm blades also work well for parking deck coatings, epoxy, and elastomeric coatings. The 2.5cm blades are for use with the 6280HD and any of National's Ride-on Scrapers. This...
Compare 7093 1" Blade Designed for VCT and adhesive re-scraper, these 2.5cm blades also work well for parking deck coatings, epoxy, and elastomeric coatings. The 2.5cm blades are for use with the 6280HD and any of National's Ride-on Scrapers. This...
Compare 7092 1" Blade Designed for VCT and adhesive re-scraper, these 2.5cm blades also work well for parking deck coatings, epoxy, and elastomeric coatings. The 2.5cm blades are for use with the 6280HD and any of National's Ride-on Scrapers. This...
Compare 7091 1" Blade Designed for VCT and adhesive re-scraper, these 2.5cm blades also work well for parking deck coatings, epoxy, and elastomeric coatings. The 2.5cm blades are for use with the 6280HD and any of National's Ride-on Scrapers. This...
Compare 7079-6 Angle Shank w/Carbide Tip These shanks are designed for ceramic removal and thin-set re-scraping. The 7079-6 is 15cm x 15cm x 1.27 This shank works with any of National's Ride-on scrapers.
Compare 7079-7 Angle Shank w/Carbide Tip These shanks are designed for ceramic removal and thin-set re-scraping. The 7079-6 is 10cm x 15cm x 1.27 This shank works with any of National's Ride-on scrapers.
Compare 7079-2 Angle Shank w/Carbide Tip These shanks are designed for ceramic removal and thin-set re-scraping. The 7079-6 is 5cm x 15cm x 1.27 This shank works with any of National's Ride-on scrapers.
Compare 7077-8 Tapered Wood Floor Shank The longer taper on this wood floor shank works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. The 7077-8 is 9cm x 20cm x .8cm. This shank works on any of National's Ride-on...
Compare 7077-11 Tapered Wood Floor Shank The longer taper on this wood floor shank works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. The 7077-11 is 5cm x 28cm x .8cm. This shank works on any of National's Ride-on...
Compare 7075-8 Tapered Wood Floor Shank The longer taper on this wood floor shank works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. The 7077-11 is 5cm x 20cm x .8cm. This shank works on any of National's Ride-on Floor...
Compare 7075-11 Tapered Wood Floor Shank The longer taper on this wood floor shank works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. The 7075-11 is 5cm x 28cm x .8cm. This shank works on any of National's Ride-on Floor...
Compare 7072-6 Straight Shank w/Carbide Tip These shanks work well for removal of hard goods, thick epoxy, and elastomeric coatings. Size: 10cm x 15cm x 1.27cm. This shank works on all of National's Ride-on Scrapers.
Compare 7072-4 Straight Shank w/Carbide Tip These shanks work well for removal of hard goods, thick epoxy, and elastomeric coatings. Size: 10cm x 10cm x 1.27cm. This shank works on all of National's Ride-on Scrapers.
Compare 7072-3 Straight Shank w/Carbide Tip These shanks work well for removal of hard goods, thick epoxy, and elastomeric coatings. Size: 10cm x 8cm x 1.27cm. This shank works on all of National's Ride-on Scrapers.
Compare 7072-2 Straight Shank w/Carbide Tip These shanks work well for removal of hard goods, thick epoxy, and elastomeric coatings. Size: 10cm x 5cm x 1.27cm. This shank works on all of National's Ride-on Scrapers.
Compare 7071-4 Angle Shank This angle shank is designed to remove ceramic, wood, and thick epoxy. Size: 10cm x 10cm x 1.27cm. This shank fits on all of National's Ride-on Floor Scrapers.
Compare 7071-3 Angle Shank This angle shank is designed to remove ceramic, wood, and thick epoxy. Size: 10cm x 8cm x 1.27cm. This shank fits on all of National's Ride-on Floor Scrapers.
Compare 7071-2 Angle Shank This angle shank is designed to remove ceramic, wood, and thick epoxy. Size: 10cm x 5cm x 1.27cm. This shank fits on all of National's Ride-on Floor Scrapers.
Compare 7070-6 Straight Shank These straight shanks are designed to remove ceramic, wood and thick epoxy. Size: 10cm x 15cm x 1.27cm. These straight shanks fit on all of National's Ride-on Scrapers.
Compare 7070-4 Straight Shank These straight shanks are designed to remove ceramic, wood and thick epoxy. Size: 10cm x 10cm x 1.27cm. These straight shanks fit on all of National's Ride-on Scrapers.